Silvertone 1482, Poor Man’s Deluxe? | Warehouse Guitar Speakers

Silvertone 1482, Poor Man’s Deluxe?

Silvertone 1482, Poor Man’s Deluxe?

Silvertone 1484

Hi gang, and welcome to 2014.  My world has been seriously Silvertone lately.  First, I got to review the “new” vintage reissue Silvertone guitars for Vintage Guitar Magazine, then I wrote a feature story on the history of Silvertone electric guitars, and just last week I had a vintage mid-60s Silvertone model 1482 combo amp on my bench.  Don’t tell the folks at Fender, but I’m kinda turning into just a little bit of a Silvertone guy!  In case you don’t know, the 1482 is rated at 15-watts with a pair of 6V6’s in the output stage, and has kool 60’s shagadelic power-tube tremolo.  I’ve seen it referred to as “the poor man’s blackface Deluxe”. Let’s talk a little about what I learned from my time “inside” the 1482.  Sound like fun?  Yeah!

First a confession:  Before working on this amp, I’d never so much as peeked inside a Silvertone amp.  Don’t know why, but life just never took me in that direction.  Okay, with that disclaimer outta the way, let’s dig in.

This amp belongs to my buddy and notable Nashville Guitar Slinger Brad Sample.  Brad brought it in because it “just didn’t sound right”.  It had a certain amount of yucky fuzziness at all volumes, and it had been suggested that it needed a “thorough going-over by a good tech”.  I put her up on the bench, brad played just a note or two, and I turned the amp off.  “I know what’s wrong” I said, “the speaker’s blown”. And it was.  This is ever so common amongst “budget” amps of that era.  If an amp was rated at 15 watts RMS, they felt they were doing fine fitting it with a 15-watt rated speaker.  Shoot, who on earth would ever push an amp beyond its design specs, anyway, right?  Ha!  Can you say “overdrive pedal”?  This is why I always recommend that folks who plan to actually USE a vintage amp for regular gigging remove the original speakers, put them safely in a box for safe keeping, and replace them with something that they won’t fry! 

Silvertone 1484 with WGS ET-65 Speaker Upgrade

Brad just happened to have on hand a “one-of-a-kind” black ET-65 that, as he put it was “made for the 1482”.  So, as far as the speaker is concerned, he’s good to go.  But …

The old gal had a few other issues.  Truth be told, these amps look to me like they were NEVER really built to take the rigors of serious professional use.  And of course, they in fact were not.  They were sold through the Sears-Roebuck catalog to an almost exclusively amateur demographic.  Be that the case, they are still cool as heck in a “definitely NOT a Fender” kind of way.

Here are a few factors that distinguish these amps as most certainly not resembling Fenders in any way.

  1. The cabinet.  Finger-jointed ¾” pine?  No way, baby, it’s more like medium density cardboard butt-jointed and glued.
  2. The speaker baffle.  Plywood?  Nope.  Once again, barely above ¼” cardboard.  In the case of this amp … and I’d guess most of them … this baffle was just about disintegrated and needed to be beefed up with actual plywood.
  3. The chassis. This was downright amazing.  It was simply a L-shaped piece of aluminum, held in place by three small wood-screws.  No support, and free to flex like mad!Silvertone 1484 Chassis Capacitors
  4. Turret board electronics?  Nope!  It was heath-kit “build it yourself” style point-to-point wired.  Where one component ends, the next begins.  This was a real problem when combined with the previous point about the chassis, because when that chassis flexed, the components literally got yanked apart!  In the case of this amp, the carnage was limited to one orange-drop capacitor.
  5. Filter Caps.  (or lack thereof).  I’d literally NEVER seen an amp with this little filtering.  I mean, even an original 1940’s 6-watt Fender Champion had more filtering.  If you’re looking for bottom-end that falls apart in a hurry, well, this is a good way to accomplish it.

So having pointed all this out, you might begin to believe that I downright dislike the little Silvertone combo … but you would be ever so wrong.  Truth is I flat out LOVE it.  But!  I believe it’s important to understand what it is, and what it is not.  First, it certainly is NOT a poor man’s Deluxe!  It’s also probably not a very good choice for a hard-gigging player.  What it is is an amp that can dish out knarrley, raunchy, 60’s garage-band rock tones in a way that will NEVER EVER be produced by any form of “modeling”.  You just can’t model that level of imperfection.  All of the shortcuts and cost-saving measures employed in the design and construction of this amp add up to an amp of unrivaled glorious imperfection.  This is the antithesis of  hard-hitting gut-kicking scooped-mids nu-metal tones … it hits with a fluffy velvet glove and has a big-fat mid-section even a middle-aged Italian mob boss would be hard-pressed to best.

And, when it comes right down to it, no other amp is “sexy” in quite the same way.

Silvertone 1484 1485

email Vaughn     About Vaughn Skow

Britt Rossman
04/22/2014 9:16pm

Hey Vaughn,

My first amp was a 90's SS Fender Frontman. I have to say the speaker didnt sound half-bad after all the beating I gave it. I purchased a 1484 head unit about 5 years ago and haven't looked back. I've spent years cobbling together a random assortment of whatever speakers (usually old AlNiCo out of cheap consoles), and oddly hacked cabs to hold them..

Not much has changed, as I still don't have a lot of cash. But, that has been the best $200 I've ever spent. I still find new ways to make that amp surprise me with it's range of tones. In general, there is no escaping the trashy sounds, especially at higher volumes. But, you know, it IS possible to get cleans, and the tone stack is very reactive. 

My experience with these amps tells me to dime the amp, and let you guitar volume (and your hands!) do the dynamic dances for you. I know you're a big Fender guy, so I am quite happy you enjoyed this funky little box of junk!

 - BR